Vinyl shutters are durable and improve the look of your home. In many cases, they can actually add to the value of the home. They are easy to install and make a great do it yourself project. If you prefer not to do the job, you can hire a professional at a reasonable price. The job doesnt take very long, so you wont pay a fortune in labor.
Shutters come in a variety of sizes and styles. You can find them in any home improvement center, such as Home Depot or Lowes. These companies can offer advice to the do it yourself homeowner or can arrange for professional installation.
Benefits of Shutters made of Vinyl
Vinyl is less expensive than wood shutters and they last longer. Wood has a tendency to crack and split over time. In addition, the paint fades and peels. For this reason, they need to be repainted every few years to keep them in new condition. This is labor intensive and adds to the overall cost. Vinyl is easier to clean and require very little maintenance. Just wipe them down with a damp rag to clean.
Vinyl is a better choice for humid climates or moist locations. This includes humid weather and outdoor pool or hot tub areas. The moisture in these areas can cause warping and swelling in wooden shutters over time. If you have an outdoor pool area, you can prevent this by installing vinyl.
Choosing the Right Shutters
There are several styles in vinyl or PVC shutters. Some can be closed to act as hurricane shutters. These are intended to protect your home in the event of a storm. Most are fixed and cant be closed. These are merely for decoration. They come in a wide variety of colors and styles to suit the taste of every homeowner. You may decide to match the color to the color of curtains and window blinds or to the exterior of your home.
Some styles have a wooden look that mimics natural grains. Others are smooth and less opaque. The style of your home and your personal preference will help you choose the best style for your home. Regardless of the style you choose, be sure the shutters are made with outdoor grade vinyl. This material is stronger and more durable. It will stand up better to the weather.
Installing Vinyl Shutters
Installing shutters is a good DIY home improvement project. With a little skill, the job should take about a half an hour per window. Instructions and mounting clips are usually included with the shutters.
Materials Needed:
Shutters
Fasteners
Instructions
Screwdriver
Drill
Tape measure
Pencil or pen for marking
Safety goggles
The basic procedure calls for drilling holes into the wall of your home and securing the shutters with fasteners that are pushed through these holes. You are drilling through the shutters and into the wall. The other method uses fasteners that are attached to the exterior wall of your home. The shutters are then clipped into place. The hardware doesnt show on the front of the shutters. |
